Difference between revisions of "Mapping"
m |
|||
| Line 32: | Line 32: | ||
* actually on the chips side it was not HW_FEB = 5, but HW_FEB = 49 --> this explains the missing/wrong calibration | * actually on the chips side it was not HW_FEB = 5, but HW_FEB = 49 --> this explains the missing/wrong calibration | ||
| + | '''FEBs replaced on L2 in November 2019:''' | ||
| + | * GEMROC 5, TIGER 6 and 7 (FEB_label 23): HW_FEB = 34 --> 53 | ||
| + | * GEMROC 9, TIGER 2 and 3 (FEB_label 37): HW_FEB = 57 --> 49 | ||
| + | |||
== Known issues == <!--T:8--> | == Known issues == <!--T:8--> | ||
Revision as of 22:53, 20 November 2019
Contents
GEMROCs history[edit | edit source]
- GEMROC 10 was replaced on 18.08.2019 due to the missing reset signals for 2 FEBs: after this replacement the issue was solved.
FEBs history[edit | edit source]
FEBs replacements during 2019 May's integration week:
- GEMROC 4, TIGER 2 and 3: HW_FEB = 8 --> HW_FEB = 17
- GEMROC 4, TIGER 4 and 5: HW_FEB = 7 --> HW_FEB = 18
- GEMROC 6, TIGER 4 and 5: HW_FEB = 39 --> HW_FEB = 5
- GEMROC 7, TIGER 4 and 5: HW_FEB = 23 --> HW_FEB = 52
- GEMROC 9, TIGER 6 and 7: HW_FEB = 14 --> HW_FEB = 7
FEBs left on oL1 for the Experimental Hall Test in September 2019:
- HW_FEB = 11 (chip 1, chip 2)
- HW_FEB = 14 (chip 1, chip 2)
- HW_FEB = 17 (chip 1, chip 2)
- HW_FEB = 20 (chip 1, chip 2)
FEBs replacements during 2019 September (10.09.2019):
- GEMROC 6, TIGER 4 and 5 (FEB_label 26): HW_FEB = 5 (49*) --> HW_FEB = 50 (old FEB had missing calibration due to wrong HW label, chip 1, chip 2)
- GEMROC 8, TIGER 6 and 7 (FEB_label 35): HW_FEB = 29 --> HW_FEB = 56 (missing TP on chip 1)
- GEMROC 9, TIGER 2 and 3 (FEB_label 37): HW_FEB = 11 --> HW_FEB = 57 (several noisy and dead channels on chip 1 and chip 2)
* actually on the chips side it was not HW_FEB = 5, but HW_FEB = 49 --> this explains the missing/wrong calibration
FEBs replaced on L2 in November 2019:
- GEMROC 5, TIGER 6 and 7 (FEB_label 23): HW_FEB = 34 --> 53
- GEMROC 9, TIGER 2 and 3 (FEB_label 37): HW_FEB = 57 --> 49
Known issues[edit | edit source]
8b10b errors on GEMROC 7 TIGER 0-1
Missing calibration files for:
- QDC: FEB_label = 2 ( HW_FEB_id = L1FEB6 )
Geometry[edit | edit source]
The present position of the FEB on top of the detectors. File:Mapping FEB update 190619.pdf
Layer 1[edit | edit source]
GEMROC 0[edit | edit source]
| GEMROC 0 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 0 | 0 | 5 | 1 | 0 | OK for nL1 |
| 0 | 1 | 5 | 2 | 1 | OK for nL1 |
| 1 | 2 | 20 | 1 | 2 | left on oL1 |
| 1 | 3 | 20 | 2 | 3 | left on oL1 |
| 2 | 4 | 6 | 1 | 4 | missing calibration
random calibraiton used coming back to Torino |
| 2 | 5 | 6 | 2 | 5 | missing calibration
random calibraiton used coming back to Torino |
| 3 | 6 | 13 | 1 | 6 | OK for nL1 |
| 3 | 7 | 13 | 2 | 7 | OK for nL1 |
GEMROC 1[edit | edit source]
| GEMROC 1 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 4 | 0 | 14 | 1 | 8 | left on oL1 |
| 4 | 1 | 14 | 2 | 9 | left on oL1 |
| 5 | 2 | 3 | 1 | 10 | many dead channels
coming back to Torino |
| 5 | 3 | 3 | 2 | 11 | many dead channels
coming back to Torino |
| 6 | 4 | 18 | 1 | 12 | many dead channels
coming back to Torino |
| 6 | 5 | 18 | 2 | 13 | many dead channels
coming back to Torino |
| 7 | 6 | 19 | 1 | 14 | coming back to Torino |
| 7 | 7 | 19 | 2 | 15 | missing TP
coming back to Torino |
GEMROC 2[edit | edit source]
| GEMROC 2 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 8 | 0 | 24 | 1 | 16 | high noise
coming back to Torino |
| 8 | 1 | 24 | 2 | 17 | high noise
coming back to Torino |
| 9 | 2 | 11 | 1 | 18 | left on oL1 |
| 9 | 3 | 11 | 2 | 19 | left on oL1 |
| 10 | 4 | 22 | 1 | 20 | OK for nL1 |
| 10 | 5 | 22 | 2 | 21 | OK for nL1 |
| 11 | 6 | 21 | 1 | 22 | OK for nL1 |
| 11 | 7 | 21 | 2 | 23 | OK for nL1 |
GEMROC 3[edit | edit source]
| GEMROC 3 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 12 | 0 | 17 | 1 | 24 | left on oL1 |
| 12 | 1 | 17 | 2 | 25 | left on oL1 |
| 13 | 2 | 25 | 1 | 26 | OK for nL1 |
| 13 | 3 | 25 | 2 | 27 | OK for nL1 |
| 14 | 4 | 10 | 1 | 28 | OK for nL1 |
| 14 | 5 | 10 | 2 | 29 | OK for nL1 |
| 15 | 6 | 23 | 1 | 30 | coming back to Torino |
| 15 | 7 | 23 | 2 | 31 | 2 dead channels (close on connector)
coming back to Torino |
Layer 2[edit | edit source]
For Layer 2 channels 61, 62 and 63 are not connected to any strip, hence they should be disabled and not be considered.
GEMROC 4[edit | edit source]
| GEMROC 4 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 16 | 0 | 4 | 1 | 32 | |
| 16 | 1 | 4 | 2 | 33 | |
| 17 | 2 | 17 | 1 | 34 | |
| 17 | 3 | 17 | 2 | 35 | |
| 18 | 4 | 18 | 1 | 36 | |
| 18 | 5 | 18 | 2 | 37 | |
| 19 | 6 | 6 | 1 | 38 | |
| 19 | 7 | 6 | 2 | 39 | |
GEMROC 5[edit | edit source]
| GEMROC 5 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 20 | 0 | 9 | 1 | 40 | more noisy, check grounding |
| 20 | 1 | 9 | 2 | 41 | more noisy, check grounding |
| 21 | 2 | 33 | 1 | 42 | TDC random calibration used |
| 21 | 3 | 33 | 2 | 43 | ch. 3 very noisy
TDC random calibraiton used |
| 22 | 4 | 38 | 1 | 44 | |
| 22 | 5 | 38 | 2 | 45 | |
| 23 | 6 | 34 | 1 | 46 | ch. 26 very noisy |
| 23 | 7 | 34 | 2 | 47 | |
GEMROC 6[edit | edit source]
| GEMROC 6 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 24 | 0 | 37 | 1 | 48 | |
| 24 | 1 | 37 | 2 | 49 | |
| 25 | 2 | 36 | 1 | 50 | |
| 25 | 3 | 36 | 2 | 51 | |
| 26 | 4 | 50 | 1 | 52 | installed on Sep 2019 |
| 26 | 5 | 50 | 2 | 53 | installed on Sep 2019 |
| 27 | 6 | 1 | 1 | 54 | |
| 27 | 7 | 1 | 2 | 55 | |
GEMROC 7[edit | edit source]
| GEMROC 7 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 28 | 0 | 2 | 1 | 56 | |
| 28 | 1 | 2 | 2 | 57 | |
| 29 | 2 | 19 | 1 | 58 | |
| 29 | 3 | 19 | 2 | 59 | |
| 30 | 4 | 52 | 1 | 60 | |
| 30 | 5 | 52 | 2 | 61 | |
| 31 | 6 | 32 | 1 | 62 | |
| 31 | 7 | 32 | 2 | 63 | |
GEMROC 8[edit | edit source]
| GEMROC 8 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 32 | 0 | 30 | 1 | 64 | more noisy, check grounding |
| 32 | 1 | 30 | 2 | 65 | more noisy, check grounding |
| 33 | 2 | 26 | 1 | 66 | |
| 33 | 3 | 26 | 2 | 67 | |
| 34 | 4 | 27 | 1 | 68 | |
| 34 | 5 | 27 | 2 | 69 | |
| 35 | 6 | 56 | 1 | 70 | installed on Sep 2019 |
| 35 | 7 | 56 | 2 | 71 | installed on Sep 2019 |
GEMROC 9[edit | edit source]
| GEMROC 9 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 36 | 0 | 25 | 1 | 72 | |
| 36 | 1 | 25 | 2 | 73 | ch. 3 very noisy |
| 37 | 2 | 57 | 1 | 74 | installed on Sep 2019 |
| 37 | 3 | 57 | 2 | 75 | installed on Sep 2019 |
| 38 | 4 | 12 | 1 | 76 | |
| 38 | 5 | 12 | 2 | 77 | |
| 39 | 6 | 7 | 1 | 78 | |
| 39 | 7 | 7 | 2 | 79 | |
GEMROC 10[edit | edit source]
GEMROC 10 was replaced on 18.08.2019 due to the missing reset signals for 2 FEBs: after this replacement the issue was solved.
| GEMROC 10 | |||||
|---|---|---|---|---|---|
| SW_FEB | TIGER | HW_FEB | Chip | BESIII ID | Notes |
| 40 | 0 | 20 | 1 | 80 | |
| 40 | 1 | 20 | 2 | 81 | |
| 41 | 2 | 21 | 1 | 82 | |
| 41 | 3 | 21 | 2 | 83 | |
| 42 | 4 | 24 | 1 | 84 | |
| 42 | 5 | 24 | 2 | 85 | |
| 43 | 6 | 3 | 1 | 86 | |
| 43 | 7 | 3 | 2 | 87 | Strip disconnected!!!
ch. 45 very noisy
|
Layer 3[edit | edit source]
For Layer 3 channels 62 and 63 are not connected to any strip, hence they should be disabled and not be considered.
