Difference between revisions of "Mapping"

From BESIII Ferrara Group Wiki
Jump to: navigation, search
(GEMROC 1)
(HV_FEB changed on Feb 2023)
Line 3: Line 3:
 
==Geometry== <!--T:8-->
 
==Geometry== <!--T:8-->
  
# The old position of the FEB on top of the detectors: [[File:Mapping FEB update 190619.pdf|thumb|Update Mapping FEB on layers - 19/06/2019]]
+
#The old position of the FEB on top of the detectors: [[File:Mapping FEB update 190619.pdf|thumb|Update Mapping FEB on layers - 19/06/2019]]
 
#An update version of the FEB position: [[File:Mapping_FEB_080120.pdf]]
 
#An update version of the FEB position: [[File:Mapping_FEB_080120.pdf]]
 
#The updated version matching the CGEMBOSS strips order: [[File:20200330 FEB L1 L2.pdf|thumb|Mapping CGEMBOSS old]]
 
#The updated version matching the CGEMBOSS strips order: [[File:20200330 FEB L1 L2.pdf|thumb|Mapping CGEMBOSS old]]
 
#'''The updated version matching the CGEMBOSS strips order and with correct WEST/EAST sides:''' [[File:20200513 mapping.pdf|thumb|Mapping CGEMBOSS]]
 
#'''The updated version matching the CGEMBOSS strips order and with correct WEST/EAST sides:''' [[File:20200513 mapping.pdf|thumb|Mapping CGEMBOSS]]
 +
 
===Channels not used===
 
===Channels not used===
  
Line 58: Line 59:
  
 
'''GEMROC 8 - FEB 2''' (TIGER 4-5, FEB_label = 34)
 
'''GEMROC 8 - FEB 2''' (TIGER 4-5, FEB_label = 34)
* WHEN: mid March, RUN 376-377
+
 
* WHAT: unstable analogue VDD on TIGER 5, propagated also to other chip of same FEB (TIGER 4) and then also the whole CAEN channel
+
*WHEN: mid March, RUN 376-377
* ACTION: cable disconnected on 23/06/2020 due to overcurrent on CAEN channel to preserve other FEBs of the same LV channel
+
*WHAT: unstable analogue VDD on TIGER 5, propagated also to other chip of same FEB (TIGER 4) and then also the whole CAEN channel
 +
*ACTION: cable disconnected on 23/06/2020 due to overcurrent on CAEN channel to preserve other FEBs of the same LV channel
  
  
 
'''GEMROC 9 - TIGER 0''' (FEB_label = 36, chip 1)
 
'''GEMROC 9 - TIGER 0''' (FEB_label = 36, chip 1)
* WHEN: 12/05/2020, RUN 405
+
 
* WHAT: chip does not configure  
+
*WHEN: 12/05/2020, RUN 405
 +
*WHAT: chip does not configure
  
  
 
'''GEMROC 0 - FEB 2''' (TIGER 4-5, FEB_label = 2)
 
'''GEMROC 0 - FEB 2''' (TIGER 4-5, FEB_label = 2)
* WHEN: 29/05/2020, RUN 408
+
 
* WHAT: missing analogue current (IA)
+
*WHEN: 29/05/2020, RUN 408
* WHY: aVDD ok up to DLVPC, since no current is absorbed by the FEB the issue may be in the short-haul cable not properly connected to the FEB (aVDD is the first wire of the cable and so it is more prone to break)
+
*WHAT: missing analogue current (IA)
 +
*WHY: aVDD ok up to DLVPC, since no current is absorbed by the FEB the issue may be in the short-haul cable not properly connected to the FEB (aVDD is the first wire of the cable and so it is more prone to break)
  
  
 
'''GEMROC 8 - FEB 0''' (TIGER 0-1, FEB_label = 32)
 
'''GEMROC 8 - FEB 0''' (TIGER 0-1, FEB_label = 32)
* WHEN: 29/05/2020, RUN 408
+
 
* WHAT: missing analogue current (IA)
+
*WHEN: 29/05/2020, RUN 408
* WHY: aVDD ok up to DLVPC, since no current is absorbed by the FEB the issue may be in the short-haul cable not properly connected to the FEB (aVDD is the first wire of the cable and so it is more prone to break)
+
*WHAT: missing analogue current (IA)
 +
*WHY: aVDD ok up to DLVPC, since no current is absorbed by the FEB the issue may be in the short-haul cable not properly connected to the FEB (aVDD is the first wire of the cable and so it is more prone to break)
  
  
 
'''GEMROC 10 - FEB 2''' (TIGER 4-5, FEB_label = 42)
 
'''GEMROC 10 - FEB 2''' (TIGER 4-5, FEB_label = 42)
* WHEN: 16/09/2020, NO ACQUISITION (start from post-summer RUNs)
+
 
* WHAT: chip does configure, but the absorbed current (both analogue and digital) and FEB temperature show strange values and behaviour
+
*WHEN: 16/09/2020, NO ACQUISITION (start from post-summer RUNs)
* WHY: to be investigated, from data (RUN 418-420) TIGER 85 seems ok, while TIGER 84 is almost with no data
+
*WHAT: chip does configure, but the absorbed current (both analogue and digital) and FEB temperature show strange values and behaviour
* UPDATE: on 04/08/2021 chips do not configure anymore
+
*WHY: to be investigated, from data (RUN 418-420) TIGER 85 seems ok, while TIGER 84 is almost with no data
 +
*UPDATE: on 04/08/2021 chips do not configure anymore
  
  
 
'''GEMROC 10 - TIGER 7''' (FEB_label = 43)
 
'''GEMROC 10 - TIGER 7''' (FEB_label = 43)
* WHEN: 22/09/2020, NO ACQUISITION (start from post-summer RUNs)
+
 
* WHAT: chip does not configure, the other chip on the same FEB is OK (dead after 3 days)
+
*WHEN: 22/09/2020, NO ACQUISITION (start from post-summer RUNs)
* WHY: a drop of water cooling system was spotted on this FEB, may be the cause of this issue
+
*WHAT: chip does not configure, the other chip on the same FEB is OK (dead after 3 days)
 +
*WHY: a drop of water cooling system was spotted on this FEB, may be the cause of this issue
  
  
 
'''GEMROC 10 - TIGER 6''' (FEB_label = 43)
 
'''GEMROC 10 - TIGER 6''' (FEB_label = 43)
* WHEN: 25/09/2020, NO ACQUISITION (start from post-summer RUNs)
+
 
* WHAT: chip does not configure, the other chip on the same FEB had the same issue 3 days ago
+
*WHEN: 25/09/2020, NO ACQUISITION (start from post-summer RUNs)
* WHY: a drop of water cooling system was spotted on this FEB, may be the cause of this issue
+
*WHAT: chip does not configure, the other chip on the same FEB had the same issue 3 days ago
 +
*WHY: a drop of water cooling system was spotted on this FEB, may be the cause of this issue
  
  
 
'''GEMROC 2 - TIGER 4'''
 
'''GEMROC 2 - TIGER 4'''
* WHEN: 04/08/2021
+
 
* WHAT: chip does not configure, the other chip on the same FEB is OK
+
*WHEN: 04/08/2021
 +
*WHAT: chip does not configure, the other chip on the same FEB is OK
  
  
 
'''GEMROC 7 - TIGER 3'''
 
'''GEMROC 7 - TIGER 3'''
* WHEN: 28/09/2021
+
 
* WHAT: chip does not configure, different values at every register read
+
*WHEN: 28/09/2021
 +
*WHAT: chip does not configure, different values at every register read
  
  
 
'''GEMROC 5 - TIGER 1'''
 
'''GEMROC 5 - TIGER 1'''
* WHEN: 28/09/2021
+
 
* WHAT: chip does not configure, read values are all 0
+
*WHEN: 28/09/2021
 +
*WHAT: chip does not configure, read values are all 0
  
  
 
'''GEMROC 7 - TIGER 7'''
 
'''GEMROC 7 - TIGER 7'''
* WHEN: 22/11/2021
+
 
* WHAT: Time delay scan not ok
+
*WHEN: 22/11/2021
 +
*WHAT: Time delay scan not ok
  
  
 
'''GEMROC 4 - FEB 2''' (TIGER 4-5)
 
'''GEMROC 4 - FEB 2''' (TIGER 4-5)
* WHEN: 17/01/2022
+
 
* WHAT: Analogue current almost 0, channels not responding properly (TIGER 4 seems ok, TIGER 5 has no hits)
+
*WHEN: 17/01/2022
* WHEN: 22/03/2022
+
*WHAT: Analogue current almost 0, channels not responding properly (TIGER 4 seems ok, TIGER 5 has no hits)
* WHAT: chips do not configure
+
*WHEN: 22/03/2022
 +
*WHAT: chips do not configure
  
  
 
'''GEMROC 10 - FEB 1''' (TIGER 2-3)
 
'''GEMROC 10 - FEB 1''' (TIGER 2-3)
* WHEN: 17/01/2022
+
 
* WHAT: Errors on temperature read --> FEB is kept ON, disable automatic turning OFF (TIGER 2 seems ok, TIGER 3 has no hits)
+
*WHEN: 17/01/2022
* WHY: maybe APT 1000 sensor read errors
+
*WHAT: Errors on temperature read --> FEB is kept ON, disable automatic turning OFF (TIGER 2 seems ok, TIGER 3 has no hits)
 +
*WHY: maybe APT 1000 sensor read errors
  
  
 
'''GEMROC 1 - FEB 3'''
 
'''GEMROC 1 - FEB 3'''
* WHEN: 22/03/2022
+
 
* WHAT: Analogue current almost 0, no baseline found in threshold scan
+
*WHEN: 22/03/2022
 +
*WHAT: Analogue current almost 0, no baseline found in threshold scan
  
  
 
'''GEMROC 4 - FEB 3''' (TIGER 6-7)
 
'''GEMROC 4 - FEB 3''' (TIGER 6-7)
* WHEN: 04/11/2022
+
 
* WHAT: chip does not configure, read values are all 0
+
*WHEN: 04/11/2022
 +
*WHAT: chip does not configure, read values are all 0
  
 
==Known issues== <!--T:8-->
 
==Known issues== <!--T:8-->
Line 488: Line 504:
 
|18
 
|18
 
|4
 
|4
|[[L2 FEB18 Chip1|18]]
+
|[[L2 FEB18 Chip1|57]]
 
|1
 
|1
 
|36
 
|36
|17/01/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|18
 
|18
 
|5
 
|5
|[[L2 FEB18 Chip2|18]]
+
|[[L2 FEB18 Chip2|57]]
 
|2
 
|2
 
|37
 
|37
|17/01/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|19
 
|19
 
|6
 
|6
|[[L2 FEB6 Chip1|6]]
+
|[[L2 FEB6 Chip1|55]]
 
|1
 
|1
 
|38
 
|38
|24/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|19
 
|19
 
|7
 
|7
|[[L2 FEB6 Chip2|6]]
+
|[[L2 FEB6 Chip2|55]]
 
|2
 
|2
 
|39
 
|39
|24/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|}
 
|}
Line 536: Line 552:
 
|20
 
|20
 
|0
 
|0
|[[L2 FEB9 Chip1|9]]
+
|[[L2 FEB9 Chip1|69]]
 
|1
 
|1
 
|40
 
|40
|23/07/18
+
|
|more noisy, check grounding
+
|''installed on Feb 2023''
 
|-
 
|-
 
|20
 
|20
 
|1
 
|1
|[[L2 FEB9 Chip2|9]]
+
|[[L2 FEB9 Chip2|69]]
 
|2
 
|2
 
|41
 
|41
|23/07/18
+
|
|more noisy, check grounding
+
|''installed on Feb 2023''
 
|-
 
|-
 
|21
 
|21
Line 569: Line 585:
 
|22
 
|22
 
|4
 
|4
|[[L2 FEB38 Chip1|38]]
+
|[[L2 FEB38 Chip1|31]]
 
|1
 
|1
 
|44
 
|44
|24/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|22
 
|22
 
|5
 
|5
|[[L2 FEB38 Chip2|38]]
+
|[[L2 FEB38 Chip2|31]]
 
|2
 
|2
 
|45
 
|45
|24/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|23
 
|23
Line 633: Line 649:
 
|25
 
|25
 
|2
 
|2
|[[L2 FEB36 Chip1|36]]
+
|[[L2 FEB36 Chip1|62]]
 
|1
 
|1
 
|50
 
|50
|18/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|25
 
|25
 
|3
 
|3
|[[L2 FEB36 Chip2|36]]
+
|[[L2 FEB36 Chip2|62]]
 
|2
 
|2
 
|51
 
|51
|18/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|26
 
|26
Line 713: Line 729:
 
|29
 
|29
 
|2
 
|2
|[[L2 FEB19 Chip1|19]]
+
|[[L2 FEB19 Chip1|72]]
 
|1
 
|1
 
|58
 
|58
|17/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|29
 
|29
 
|3
 
|3
|[[L2 FEB19 Chip2|19]]
+
|[[L2 FEB19 Chip2|72]]
 
|2
 
|2
 
|59
 
|59
|17/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|30
 
|30
 
|4
 
|4
|[[L2 FEB52 Chip1|52]]
+
|[[L2 FEB52 Chip1|65]]
 
|1
 
|1
 
|60
 
|60
|12/04/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|30
 
|30
 
|5
 
|5
|[[L2 FEB52 Chip2|52]]
+
|[[L2 FEB52 Chip2|65]]
 
|2
 
|2
 
|61
 
|61
|12/04/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|31
 
|31
 
|6
 
|6
|[[L2 FEB32 Chip1|32]]
+
|[[L2 FEB32 Chip1|58]]
 
|1
 
|1
 
|62
 
|62
|25/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|31
 
|31
 
|7
 
|7
|[[L2 FEB32 Chip2|32]]
+
|[[L2 FEB32 Chip2|58]]
 
|2
 
|2
 
|63
 
|63
|25/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|}
 
|}
Line 777: Line 793:
 
|32
 
|32
 
|0
 
|0
|[[L2 FEB30 Chip1|30]]
+
|[[L2 FEB30 Chip1|63]]
 
|1
 
|1
 
|64
 
|64
|24/07/18
+
|
|more noisy, check grounding
+
|''installed on Feb 2023''
 
|-
 
|-
 
|32
 
|32
 
|1
 
|1
|[[L2 FEB30 Chip2|30]]
+
|[[L2 FEB30 Chip2|63]]
 
|2
 
|2
 
|65
 
|65
|24/07/18
+
|
|more noisy, check grounding
+
|''installed on Feb 2023''
 
|-
 
|-
 
|33
 
|33
 
|2
 
|2
|[[L2 FEB26 Chip1|26]]
+
|[[L2 FEB26 Chip1|15]]
 
|1
 
|1
 
|66
 
|66
|17/01/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|33
 
|33
 
|3
 
|3
|[[L2 FEB26 Chip2|26]]
+
|[[L2 FEB26 Chip2|15]]
 
|2
 
|2
 
|67
 
|67
|17/01/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|34
 
|34
 
|4
 
|4
|[[L2 FEB27 Chip1|27]]
+
|[[L2 FEB27 Chip1|59]]
 
|1
 
|1
 
|68
 
|68
|25/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|34
 
|34
 
|5
 
|5
|[[L2 FEB27 Chip2|27]]
+
|[[L2 FEB27 Chip2|59]]
 
|2
 
|2
 
|69
 
|69
|25/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|35
 
|35
Line 857: Line 873:
 
|36
 
|36
 
|0
 
|0
|[[L2 FEB25 Chip1|25]]
+
|[[L2 FEB25 Chip1|61]]
 
|1
 
|1
 
|72
 
|72
|23/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|36
 
|36
 
|1
 
|1
|[[L2 FEB25 Chip2|25]]
+
|[[L2 FEB25 Chip2|61]]
 
|2
 
|2
 
|73
 
|73
|23/07/18
+
|
|ch. 3 very noisy
+
|''installed on Feb 2023''
 
|-
 
|-
 
|37
 
|37
Line 889: Line 905:
 
|38
 
|38
 
|4
 
|4
|[[L2 FEB12 Chip1|12]]
+
|[[L2 FEB12 Chip1|66]]
 
|1
 
|1
 
|76
 
|76
|16-27/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|38
 
|38
 
|5
 
|5
|[[L2 FEB12 Chip2|12]]
+
|[[L2 FEB12 Chip2|66]]
 
|2
 
|2
 
|77
 
|77
|16-27/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|39
 
|39
 
|6
 
|6
|[[L2 FEB7 Chip1|7]]
+
|[[L2 FEB7 Chip1|70]]
 
|1
 
|1
 
|78
 
|78
|16/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|39
 
|39
 
|7
 
|7
|[[L2 FEB7 Chip2|7]]
+
|[[L2 FEB7 Chip2|70]]
 
|2
 
|2
 
|79
 
|79
|16/07/18
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|}
 
|}
Line 955: Line 971:
 
|41
 
|41
 
|2
 
|2
|[[L2 FEB21 Chip1|21]]
+
|[[L2 FEB21 Chip1|64]]
 
|1
 
|1
 
|82
 
|82
|31/07/18
+
|
|<del>Missing reset signal<del>
+
|''installed on Feb 2023''<del><del>
 
|-
 
|-
 
|41
 
|41
 
|3
 
|3
|[[L2 FEB21 Chip2|21]]
+
|[[L2 FEB21 Chip2|64]]
 
|2
 
|2
 
|83
 
|83
|31/07/18
+
|
|<del>Missing reset signal<del>
+
|''installed on Feb 2023''<del><del>
 
|-
 
|-
 
|42
 
|42
 
|4
 
|4
|[[L2 FEB24 Chip1|24]]
+
|[[L2 FEB24 Chip1|54]]
 
|1
 
|1
 
|84
 
|84
|17/01/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|42
 
|42
 
|5
 
|5
|[[L2 FEB24 Chip2|24]]
+
|[[L2 FEB24 Chip2|54]]
 
|2
 
|2
 
|85
 
|85
|17/01/19
 
 
|
 
|
 +
|''installed on Feb 2023''
 
|-
 
|-
 
|43
 
|43
 
|6
 
|6
|[[L2 FEB3 Chip1|3]]
+
|[[L2 FEB3 Chip1|71]]
 
|1
 
|1
 
|86
 
|86
|24/07/18
+
|
|<del>Missing reset signal<del>
+
|''installed on Feb 2023''<del><del>
 
|-
 
|-
 
|43
 
|43
 
|7
 
|7
|[[L2 FEB3 Chip2|3]]
+
|[[L2 FEB3 Chip2|71]]
 
|2
 
|2
 
|87
 
|87
|24/07/18
+
|
|'''Strip disconnected!!!'''
+
|''installed on Feb 2023''<del><del>
ch. 45 very noisy
 
 
 
<del>Missing reset signal<del>
 
 
|-
 
|-
 
|}
 
|}
Line 1,161: Line 1,174:
 
==Ferrara/Test Beam Setup== <!--T:8-->
 
==Ferrara/Test Beam Setup== <!--T:8-->
  
* Planars 0-1 get HV from RIGHT distributor
+
*Planars 0-1 get HV from RIGHT distributor
* Planars 2-3 get HV from LEFT distributor
+
*Planars 2-3 get HV from LEFT distributor
  
 
===GEMROC 0===
 
===GEMROC 0===
Line 1,273: Line 1,286:
 
| -
 
| -
 
|planar 2 (stripX)
 
|planar 2 (stripX)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,281: Line 1,294:
 
| -
 
| -
 
|planar 2 (stripY)
 
|planar 2 (stripY)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,289: Line 1,302:
 
| -
 
| -
 
|planar 2 (stripY)
 
|planar 2 (stripY)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,313: Line 1,326:
 
| -
 
| -
 
|planar 3 (stripY)
 
|planar 3 (stripY)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,321: Line 1,334:
 
| -
 
| -
 
|planar 3 (stripY)
 
|planar 3 (stripY)
|  
+
|
 
|-
 
|-
 
|}
 
|}
Line 1,327: Line 1,340:
 
Notes:
 
Notes:
  
# [[L3 FEB28 Chip2]] had damaged bonding on Sun 20 June 2021: the FEB has been replaced with L3 FEB13 on Tue 22 June 2021
+
#[[L3 FEB28 Chip2]] had damaged bonding on Sun 20 June 2021: the FEB has been replaced with L3 FEB13 on Tue 22 June 2021
# L3 FEB9 and L3 FEB29 (reading planar 0) were swapped at the start of July 2021 CERN test-beam: cosmic data from Ferrara setup has these two FEBs inverted
+
#L3 FEB9 and L3 FEB29 (reading planar 0) were swapped at the start of July 2021 CERN test-beam: cosmic data from Ferrara setup has these two FEBs inverted
# L3 FEB4 had several dead channels during July 2021 CERN test-beam: L3 FEB4 has been replaced with L3 FEB8 on Sat 17 July 2021
+
#L3 FEB4 had several dead channels during July 2021 CERN test-beam: L3 FEB4 has been replaced with L3 FEB8 on Sat 17 July 2021
 
 
  
  
Line 1,444: Line 1,456:
 
| -
 
| -
 
|planar 2 (stripX)
 
|planar 2 (stripX)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,452: Line 1,464:
 
| -
 
| -
 
|planar 2 (stripY)
 
|planar 2 (stripY)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,460: Line 1,472:
 
| -
 
| -
 
|planar 2 (stripY)
 
|planar 2 (stripY)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,484: Line 1,496:
 
| -
 
| -
 
|planar 3 (stripY)
 
|planar 3 (stripY)
|  
+
|
 
|-
 
|-
 
|
 
|
Line 1,492: Line 1,504:
 
| -
 
| -
 
|planar 3 (stripY)
 
|planar 3 (stripY)
|  
+
|
 
|-
 
|-
 
|}
 
|}

Revision as of 20:52, 11 July 2023

Geometry[edit | edit source]

  1. The old position of the FEB on top of the detectors: File:Mapping FEB update 190619.pdf
  2. An update version of the FEB position: File:Mapping FEB 080120.pdf
  3. The updated version matching the CGEMBOSS strips order: File:20200330 FEB L1 L2.pdf
  4. The updated version matching the CGEMBOSS strips order and with correct WEST/EAST sides: File:20200513 mapping.pdf

Channels not used[edit | edit source]

The following channels are not connected to any strip because the correspondent FEB is connected to the last connector of the anode foil

  • FEB_label=0, chip 2 --> ch. 3,4,11,22 (X-side) 41,43,45,47,54 (V-side)
  • FEB_label=8, chip 1 --> ch. 0,16,38,42 (X-side) 8,10,21,45,47,57 (V-side)
  • FEB_label=36, chip 1 --> ch. 57 (V-side)
  • FEB_label=43, chip 1 --> ch. 57 (V-side)

GEMROCs history[edit | edit source]

  • GEMROC 10 was replaced on 18.08.2019 due to the missing reset signals for 2 FEBs: after this replacement the issue was solved.

FEBs history[edit | edit source]

FEBs replacements during 2019 May's integration week:

  • GEMROC 4, TIGER 2 and 3: HW_FEB = 8 --> HW_FEB = 17
  • GEMROC 4, TIGER 4 and 5: HW_FEB = 7 --> HW_FEB = 18
  • GEMROC 6, TIGER 4 and 5: HW_FEB = 39 --> HW_FEB = 5 (No TP on T5)
  • GEMROC 7, TIGER 4 and 5: HW_FEB = 23 --> HW_FEB = 52 (No good TD values)
  • GEMROC 9, TIGER 6 and 7: HW_FEB = 14 --> HW_FEB = 7 (Can't configure T7)


FEBs left on oL1 for the Experimental Hall Test in September 2019:


FEBs replacements during 2019 September (10.09.2019):

  • GEMROC 6, TIGER 4 and 5 (FEB_label 26): HW_FEB = 5 (49*) --> HW_FEB = 50 (old FEB had missing calibration due to wrong HW label, chip 1, chip 2)
  • GEMROC 8, TIGER 6 and 7 (FEB_label 35): HW_FEB = 29 --> HW_FEB = 56 (missing TP on chip 1)
  • GEMROC 9, TIGER 2 and 3 (FEB_label 37): HW_FEB = 11 --> HW_FEB = 57 (several noisy and dead channels on chip 1 and chip 2)
* actually on the chips side it was not HW_FEB = 5, but HW_FEB = 49 --> this explains the missing/wrong calibration


FEBs replaced on L2 in November 2019:

  • GEMROC 5, TIGER 6 and 7 (FEB_label 23): HW_FEB = 34 --> 53 (dead chip due to water leakage, chip 1, chip 2)
  • GEMROC 9, TIGER 2 and 3 (FEB_label 37): HW_FEB = 57 --> 49 (some holes in the stripX 1-45, chip 1, chip 2)

FEB/TIGER issues[edit | edit source]

The following FEB or TIGER are currently disabled or have some issues:

GEMROC 8 - FEB 2 (TIGER 4-5, FEB_label = 34)

  • WHEN: mid March, RUN 376-377
  • WHAT: unstable analogue VDD on TIGER 5, propagated also to other chip of same FEB (TIGER 4) and then also the whole CAEN channel
  • ACTION: cable disconnected on 23/06/2020 due to overcurrent on CAEN channel to preserve other FEBs of the same LV channel


GEMROC 9 - TIGER 0 (FEB_label = 36, chip 1)

  • WHEN: 12/05/2020, RUN 405
  • WHAT: chip does not configure


GEMROC 0 - FEB 2 (TIGER 4-5, FEB_label = 2)

  • WHEN: 29/05/2020, RUN 408
  • WHAT: missing analogue current (IA)
  • WHY: aVDD ok up to DLVPC, since no current is absorbed by the FEB the issue may be in the short-haul cable not properly connected to the FEB (aVDD is the first wire of the cable and so it is more prone to break)


GEMROC 8 - FEB 0 (TIGER 0-1, FEB_label = 32)

  • WHEN: 29/05/2020, RUN 408
  • WHAT: missing analogue current (IA)
  • WHY: aVDD ok up to DLVPC, since no current is absorbed by the FEB the issue may be in the short-haul cable not properly connected to the FEB (aVDD is the first wire of the cable and so it is more prone to break)


GEMROC 10 - FEB 2 (TIGER 4-5, FEB_label = 42)

  • WHEN: 16/09/2020, NO ACQUISITION (start from post-summer RUNs)
  • WHAT: chip does configure, but the absorbed current (both analogue and digital) and FEB temperature show strange values and behaviour
  • WHY: to be investigated, from data (RUN 418-420) TIGER 85 seems ok, while TIGER 84 is almost with no data
  • UPDATE: on 04/08/2021 chips do not configure anymore


GEMROC 10 - TIGER 7 (FEB_label = 43)

  • WHEN: 22/09/2020, NO ACQUISITION (start from post-summer RUNs)
  • WHAT: chip does not configure, the other chip on the same FEB is OK (dead after 3 days)
  • WHY: a drop of water cooling system was spotted on this FEB, may be the cause of this issue


GEMROC 10 - TIGER 6 (FEB_label = 43)

  • WHEN: 25/09/2020, NO ACQUISITION (start from post-summer RUNs)
  • WHAT: chip does not configure, the other chip on the same FEB had the same issue 3 days ago
  • WHY: a drop of water cooling system was spotted on this FEB, may be the cause of this issue


GEMROC 2 - TIGER 4

  • WHEN: 04/08/2021
  • WHAT: chip does not configure, the other chip on the same FEB is OK


GEMROC 7 - TIGER 3

  • WHEN: 28/09/2021
  • WHAT: chip does not configure, different values at every register read


GEMROC 5 - TIGER 1

  • WHEN: 28/09/2021
  • WHAT: chip does not configure, read values are all 0


GEMROC 7 - TIGER 7

  • WHEN: 22/11/2021
  • WHAT: Time delay scan not ok


GEMROC 4 - FEB 2 (TIGER 4-5)

  • WHEN: 17/01/2022
  • WHAT: Analogue current almost 0, channels not responding properly (TIGER 4 seems ok, TIGER 5 has no hits)
  • WHEN: 22/03/2022
  • WHAT: chips do not configure


GEMROC 10 - FEB 1 (TIGER 2-3)

  • WHEN: 17/01/2022
  • WHAT: Errors on temperature read --> FEB is kept ON, disable automatic turning OFF (TIGER 2 seems ok, TIGER 3 has no hits)
  • WHY: maybe APT 1000 sensor read errors


GEMROC 1 - FEB 3

  • WHEN: 22/03/2022
  • WHAT: Analogue current almost 0, no baseline found in threshold scan


GEMROC 4 - FEB 3 (TIGER 6-7)

  • WHEN: 04/11/2022
  • WHAT: chip does not configure, read values are all 0

Known issues[edit | edit source]

  • 8b10b errors on GEMROC 7 TIGER 0-1


Layer 1[edit | edit source]

L1 FEB pinout

GEMROC 0[edit | edit source]

GEMROC 0
FEB_label TIGER HW_FEB Chip BESIII ID Notes
0 0 61 1 0
0 1 61 2 1
1 2 5 1 2
1 3 5 2 3
2 4 2 1 4
2 5 2 2 5
3 6 21 1 6
3 7 21 2 7

GEMROC 1[edit | edit source]

GEMROC 1
FEB_label TIGER HW_FEB Chip BESIII ID Notes
4 0 25 1 8
4 1 25 2 9
5 2 10 1 10
5 3 10 2 11
6 4 29 1 12
6 5 29 2 13
7 6 34 1 14
7 7 34 2 15

GEMROC 2[edit | edit source]

GEMROC 2
FEB_label TIGER HW_FEB Chip BESIII ID Notes
8 0 32 1 16
8 1 32 2 17
9 2 26 1 18
9 3 26 2 19
10 4 27 1 20
10 5 27 2 21
11 6 22 1 22
11 7 22 2 23

GEMROC 3[edit | edit source]

GEMROC 3
FEB_label TIGER HW_FEB Chip BESIII ID Notes
12 0 24 1 24
12 1 24 2 25
13 2 4 1 26
13 3 4 2 27
14 4 19 1 28
14 5 19 2 29
15 6 30 1 30
15 7 30 2 31

Layer 2[edit | edit source]

For Layer 2 channels 61, 62 and 63 are not connected to any strip, hence they should be disabled and not be considered.

L2 FEB pinout

GEMROC 4[edit | edit source]

GEMROC 4
FEB_label TIGER HW_FEB Chip BESIII ID Cal. date Notes
16 0 4 1 32 24/07/18
16 1 4 2 33 24/07/18
17 2 17 1 34 23/07/18
17 3 17 2 35 23/07/18
18 4 57 1 36 installed on Feb 2023
18 5 57 2 37 installed on Feb 2023
19 6 55 1 38 installed on Feb 2023
19 7 55 2 39 installed on Feb 2023

GEMROC 5[edit | edit source]

GEMROC 5
FEB_label TIGER HW_FEB Chip BESIII ID Cal. date Notes
20 0 69 1 40 installed on Feb 2023
20 1 69 2 41 installed on Feb 2023
21 2 33 1 42 16/07/18 TDC random calibration used
21 3 33 2 43 16/07/18 ch. 3 very noisy

TDC random calibraiton used

22 4 31 1 44 installed on Feb 2023
22 5 31 2 45 installed on Feb 2023
23 6 53 1 46 23/05/19 installed on Nov 2019
23 7 53 2 47 23/05/19 installed on Nov 2019

GEMROC 6[edit | edit source]

GEMROC 6
FEB_label TIGER HW_FEB Chip BESIII ID Cal. date Notes
24 0 37 1 48 23/07/18
24 1 37 2 49 23/07/18
25 2 62 1 50 installed on Feb 2023
25 3 62 2 51 installed on Feb 2023
26 4 50 1 52 22/05/19 installed on Sep 2019
26 5 50 2 53 22/05/19 installed on Sep 2019
27 6 1 1 54 2017
27 7 1 2 55 2017

GEMROC 7[edit | edit source]

GEMROC 7
FEB_label TIGER HW_FEB Chip BESIII ID Cal. date Notes
28 0 2 1 56 2017
28 1 2 2 57 2017
29 2 72 1 58 installed on Feb 2023
29 3 72 2 59 installed on Feb 2023
30 4 65 1 60 installed on Feb 2023
30 5 65 2 61 installed on Feb 2023
31 6 58 1 62 installed on Feb 2023
31 7 58 2 63 installed on Feb 2023

GEMROC 8[edit | edit source]

GEMROC 8
FEB_label TIGER HW_FEB Chip BESIII ID Cal. date Notes
32 0 63 1 64 installed on Feb 2023
32 1 63 2 65 installed on Feb 2023
33 2 15 1 66 installed on Feb 2023
33 3 15 2 67 installed on Feb 2023
34 4 59 1 68 installed on Feb 2023
34 5 59 2 69 installed on Feb 2023
35 6 56 1 70 23/05/19 installed on Sep 2019
35 7 56 2 71 23/05/19 installed on Sep 2019

GEMROC 9[edit | edit source]

GEMROC 9
FEB_label TIGER HW_FEB Chip BESIII ID Cal. date Notes
36 0 61 1 72 installed on Feb 2023
36 1 61 2 73 installed on Feb 2023
37 2 49 1 74 15/10/19 installed on Nov 2019, holes in the stripX still present
37 3 49 2 75 15/10/19 installed on Nov 2019, holes in the stripX still present
38 4 66 1 76 installed on Feb 2023
38 5 66 2 77 installed on Feb 2023
39 6 70 1 78 installed on Feb 2023
39 7 70 2 79 installed on Feb 2023

GEMROC 10[edit | edit source]

GEMROC 10 was replaced on 18.08.2019 due to the missing reset signals for 2 FEBs: after this replacement the issue was solved.

GEMROC 10
FEB_label TIGER HW_FEB Chip BESIII ID Cal. date Notes
40 0 20 1 80 16/07/18
40 1 20 2 81 16/07/18
41 2 64 1 82 installed on Feb 2023
41 3 64 2 83 installed on Feb 2023
42 4 54 1 84 installed on Feb 2023
42 5 54 2 85 installed on Feb 2023
43 6 71 1 86 installed on Feb 2023
43 7 71 2 87 installed on Feb 2023

Layer 3[edit | edit source]

For Layer 3 channels 62 and 63 are not connected to any strip, hence they should be disabled and not be considered.

L3 FEB pinout


Planar GEMs[edit | edit source]

Old setup, not present anymore

GEMROC 12[edit | edit source]

GEMROC 12
FEB_label TIGER HW_FEB Chip BESIII ID Notes
48 0 32 1 96 planar MID (plane 1)
48 1 32 2 97 planar MID (plane 1)
49 2 10 1 98 planar MID (plane 1)
49 3 10 2 99 planar MID (plane 1)
50 4 empty 1 100
50 5 empty 2 101
51 6 empty 1 102
51 7 empty 2 103

GEMROC 13[edit | edit source]

GEMROC 13
FEB_label TIGER HW_FEB Chip BESIII ID Notes
52 0 9 1 104 planar BOT (plane 4)
52 1 9 2 105 planar BOT (plane 4)
53 2 28 1 106 planar BOT (plane 4)
53 3 28 2 107 planar BOT (plane 4)
54 4 26 1 108 planar TOP (plane 0)
54 5 26 2 109 planar TOP (plane 0)
55 6 29 1 110 planar TOP (plane 0)
55 7 29 2 111 planar TOP (plane 0)

Ferrara/Test Beam Setup[edit | edit source]

  • Planars 0-1 get HV from RIGHT distributor
  • Planars 2-3 get HV from LEFT distributor

GEMROC 0[edit | edit source]

GEMROC 0
FEB_label TIGER HW_FEB Chip BESIII ID Planar Notes
0 29 1 - planar 0 (stripX) swapped with HWFEB 9 at the start of testbeam (see note 2)
1 29 2 - planar 0 (stripX) swapped with HWFEB 9 at the start of testbeam (see note 2)
2 9 1 - planar 0 (stripY) swapped with HWFEB 29 at the start of testbeam (see note 2)
3 9 2 - planar 0 (stripY) swapped with HWFEB 29 at the start of testbeam (see note 2)
4 12 1 - planar 1 (stripX)
5 12 2 - planar 1 (stripX)
6 8 1 - planar 1 (stripY) mounted on 17 July 2021 (see note 3)
7 8 2 - planar 1 (stripY) mounted on 17 July 2021 (see note 3)

GEMROC 1[edit | edit source]

GEMROC 1
FEB_label TIGER HW_FEB Chip BESIII ID Planar Notes
0 5 1 - planar 2 (stripX)
1 5 2 - planar 2 (stripX)
2 32 1 - planar 2 (stripY)
3 32 2 - planar 2 (stripY)
4 13 1 - planar 3 (stripX) mounted on 22 June 2021 (see note 1)
5 13 2 - planar 3 (stripX) mounted on 22 June 2021 (see note 1)
6 26 1 - planar 3 (stripY)
7 26 2 - planar 3 (stripY)

Notes:

  1. L3 FEB28 Chip2 had damaged bonding on Sun 20 June 2021: the FEB has been replaced with L3 FEB13 on Tue 22 June 2021
  2. L3 FEB9 and L3 FEB29 (reading planar 0) were swapped at the start of July 2021 CERN test-beam: cosmic data from Ferrara setup has these two FEBs inverted
  3. L3 FEB4 had several dead channels during July 2021 CERN test-beam: L3 FEB4 has been replaced with L3 FEB8 on Sat 17 July 2021


Ferrara 2022[edit | edit source]

GEMROC 0[edit | edit source]

GEMROC 0
FEB_label TIGER HW_FEB Chip BESIII ID Planar Notes
0 47 1 - planar 0 (stripX)
1 47 2 - planar 0 (stripX)
2 22 1 - planar 0 (stripY)
3 22 2 - planar 0 (stripY)
4 41 1 - planar 1 (stripX)
5 41 2 - planar 1 (stripX)
6 15 1 - planar 1 (stripY)
7 15 2 - planar 1 (stripY)

GEMROC 1[edit | edit source]

GEMROC 1
FEB_label TIGER HW_FEB Chip BESIII ID Planar Notes
0 23 1 - planar 2 (stripX)
1 23 2 - planar 2 (stripX)
2 2 1 - planar 2 (stripY)
3 2 2 - planar 2 (stripY)
4 27 1 - planar 3 (stripX)
5 27 2 - planar 3 (stripX)
6 33 1 - planar 3 (stripY)
7 33 2 - planar 3 (stripY)